Commands¶

Commands start with the / character and can take a list of any number of arguments, separated by spaces. If an argument should contain a space, you can use the " character to surround this argument.

The commands described in this page are shown like this:

/command <mandatory argument> [optional argument]

You can get the same help as below from inside poezio with the /help command.

Note

Use command parameters like this:

Do not use quotes if they are unnecessary (words without special chars or spaces)
If the command takes several agrguments, you need to put quotes around arguments containing special chars such as backslashes or quotes
If the command always takes only one argument, then do not use quotes even for words containing special chars

Global commands¶

These commands work in any tab.

/activity¶

Usage: /activity [<general> [specific] [comment]]

Send your current activity to your contacts (use the completion to cycle through all the general and specific possible activities).

Nothing means "stop broadcasting an activity".

/bind¶

Usage: /bind <key> <eq>

Bind a key to another key or to a "command". For example, /bind ^H KEY_UP makes Control + h behave the same way as the Up key. See the key bindings documentation page for more details.

/bookmark¶

Usage: /bookmark [roomname][/nick] [autojoin] [password]

Bookmark the specified room. This command uses almost the same syntax as /join. Type /help join for syntax examples. Note that when typing /bookmark on its own, the room will be bookmarked with the nickname you're currently using in this room (instead of default_nick). You can specify an optional autojoin and password if you call it with the full line (/bookmark alone will put the room in autojoin without password). The bookmarks stored with this command are stored on your xmpp server.

/bookmark_local¶

Usage: /bookmark_local [roomname][/nick]

Bookmark the specified room (you will then auto-join it on each poezio start). This commands uses almost the same syntax as /join. Type /help join for syntax examples. Note that when typing /bookmark on its own, the room will be bookmarked with the nickname you're currently using in this room (instead of default_nick). The bookmarks stored with this command will be stored locally. They have priority over the ones stored online.

/bookmarks¶

Usage: /bookmarks

Open a Bookmarks tab in order to edit the current boookmarks.

/close¶

Close the tab.

Note

The /close command will work everywhere, except in the Contact list tab, which can’t be closed.

/destroy_room¶

Usage: /destroy_room [room JID]

Try to destroy the room given as a parameter, or the current room is not parameter is given and the current tab is a chatroom.

You need to be the owner of a room or a server admin to destroy it.

/exit¶

/quit¶

Just disconnect from the server and exit poezio.

/gaming¶

Usage: /gaming [<game name> [server address]]

Send your current gaming activity to your contacts.

Nothing means "stop broadcasting a gaming activity".

/help¶

Usage: /help [command]

If called without an argument, this command will list the available commands. If it has a valid command as an argument, this command will show the usage and the help for the given command.

/invitations¶

Show the pending invitations.

/invite¶

Usage: /invite <jid> <room> [reason]

Invite jid to room with reason (if provided).

/join¶

Usage: /join [room_name][@server][/nick] [password]

Join the specified room. You can specify a nickname after a slash (/). If no nickname is specified, you will use the default_nick in the configuration file. You can omit the room name: you will then join the room you're looking at (useful if you were kicked). You can also provide a room_name without specifying a server, the server of the room you're currently in will be used. You can also provide a password to join the room.

Examples:

/join room@server.tld
/join room@server.tld/John
/join room2
/join /me_again
/join
/join room@server.tld/my_nick password
/join / password

/last_activity¶

Usage: /activity <jid>

Show the last activity of a contact or a server (its uptime, in that case).

/list¶

Usage: /list [server.tld]

Get the list of public chatrooms in the specified server (open a List tab)

/load¶

Usage: /load <plugin name> [<other plugin> …]

Load or reload one or several plugins.

/message¶

Usage: /message <jid> [optional message]

Open a conversation with the specified JID (event if it is not in our contact list), and send a message to them, if specified.

/mood¶

Usage: /mood [<mood> [comment]] Send your current mood to your contacts (use the completion to cycle through all the possible moods).

Nothing means "stop broadcasting a mood".

/move_tab¶

Usage: /move_tab <source> <destination>

Move tab <source> to <destination>. If the create_gaps option is true, then it will leave a gap at the <source> position, leading to usual behaviour. If create_gaps is not enabled, then the tabs will number from 0 to your actual tab number, without gaps (which means their number will change if you close a tab on the left of the list).

A value of . for a parameter means the current tab.

/next¶

Go to the next room.

/plugins¶

List the loaded plugins.

/presence¶

Usage: /presence <jid> [type] [status]

Send a directed presence to jid using type and status if provided.

/prev¶

Go to the previous room.

/rawxml¶

Usage: /rawxml <stanza>

Send a custom XML stanza.

/reload¶

Reload the config. You can achieve the same by sending SIGUSR1 to poezio.

/remove_bookmark¶

Usage: /remove_bookmark [room_jid]

Remove the bookmark on room_jid or the one on the current tab, if any.

/runkey¶

Usage: /runkey <key>

Execute the action defined for key. For example, /runkey KEY_PPAGE will scroll up, or /runkey ^N will go to the next tab.

/self¶

Reminds you of who you are and what your status is.

/server_cycle¶

Usage: /server_cycle [server.tld] [message]

Disconnect and reconnect in all the rooms of server.tld.

/set¶

Usage: /set [plugin|][section] <option> <value>

Set the value to the option in your configuration file. You can, for example, change your default nickname by doing "/set default_nick toto" or your password with "/set password blabla". Doing so will write in the main config file, and in the main section ([Poezio]). But you can also write to another section, with /set bindings M-i ^i, to a plugin configuration with /set mpd_client| host main (notice the |, it is mandatory to write in a plugin), or even to another section in a plugin configuration /set plugin|other_section option value. toggle can be used as a special value for a boolean option. It just set the option to true if it’s currently false, and to false if it’s currently true.

/set_default¶

Usage: /set_default [section] <option>

Set the value of an option back to the default. For example, /set_default password will reset the password option.

/status¶

Usage: /status <availability> [status message]

Set your availability and (optionaly) your status message. The <availability> argument is one of "available, chat, away, afk, dnd, busy, xa" and the optional [status] argument will be your status message.'

/theme¶

Usage: /theme [theme_name]

Reload the theme defined in the config file. If theme_name is given, this command will act like /set theme theme_name then /theme.

/toggle¶

Usage: /toggle <option>

Toggle an option, shortcut for /set <option> toggle.

/unload¶

Usage: /unload <plugin name> [<other plugin> …]

Unload one or several plugins.

/version¶

Usage: /version <jid>

Get the software version of the given JID (usually its XMPP client and Operating System).

/win¶

/w¶

Usage: /win <number or string>

Go to the matching tab. If the argument is a number, it goes to the tab with that number. Otherwise, it goes to the next tab whose name contains the given string.

/xml_tab¶

Open an XML tab.

Chat tab commands¶

These commands will work in any conversation tab (MultiUserChat, Private, or: Conversation tabs).

/clear¶

Clear the current buffer.

/correct¶

Usage: /correct <corrected message>

Replace the content of the last sent message with corrected message.

/say¶

Usage: /say <message>

Just send the message (only useful it you want your message to begin with a /). Note that you can also send message starting with a / by starting it with //.

/xhtml¶

Usage: /xhtml <custom xhtml>

Send a custom xhtml message to the current tab.

MultiUserChat tab commands¶

/affiliation¶

Usage: /affiliation <nick> <affiliation>

Sets the affiliation of the participant designated by nick to the given affiliation (can be one of owner, admin, member, outcast and none).

/clear [Chatroom version]¶

Usage: /clear

Clear the messages buffer.

/color¶

Usage: /color <nick> <color>

Assign a color to the given nick. The nick and all its alias (nicks are considered identical if they only differ by the presence of one ore more _ character at the beginning or the end. For example _Foo and Foo___ are considered aliases of the nick Foo) will then always have the specified color, in all MultiUserChat tabs. This is true whatever the value of deterministic_nick_colors is.

Use the completion to get a list of all the available color values. Use the special color unset to remove the attributed color on this nick. You can also use random to attribute a random color.

/configure¶

Configure the current room through a form (Open a Dataforms tab).

/cycle¶

Usage: /cycle [message]

Leave the current room an rejoint it immediatly. You can specify an optional quit message.

/ignore¶

Usage: /ignore <nickname>

Ignore a specified nickname.

/info¶

Usage: /info <nickname>

Display some information about the user in the room: his/her role, affiliation, status, and status message.

/invite [Chatroom version]¶

Usage: /invite <jid> [reason]

Invite jid to this room with reason (if provided).

/kick¶

Usage: /kick <nick> [reason]

Kick the user with the specified nickname. You can also give an optional reason.

/names¶

Get the list of the users in the room, their number, and the list of the people assuming different roles.

/nick¶

Usage: /nick <nickname>

Change your nickname in the current room.

/part¶

Usage: /part [message]

Disconnect you from a room. You can specify an optional message.

/query¶

Usage: /query <nick> [message]

Open a Private tab with <nick>. This nick has to be present in the room you’re currently in. If you specified a message after the nickname, it will be sent to this user.

/recolor¶

Usage: /recolor [random]

Re-assign a color to all the participants in the current room, based on the last time they talked. Use this if the participants currently talking have too many identical colors. If a random argument is given, the participants will be shuffled before they are assigned a color.

/role¶

Usage: /affiliation <nick> <role>

Sets the role of the participant designated by nick to the given role (can be one of moderator, participant, visitor and none).

/topic¶

Usage: /topic [subject]

Change the subject of the room.

Using the auto-completion of this command writes the current topic in the input, to help the user make a small change to the topic whithout having to rewrite it all by hand.

If no subject is specified as an argument, the current topic is displayed, unchanged.

/unignore¶

Usage: /unignore <nickname>

Remove the specified nickname from the ignore list.

/version¶

Usage: /version <nickname or jid>

Get the software version of the given nick in room or the given jid (usually its XMPP client and Operating System).

Private tab commands¶

/info¶: Display some info about this user in the MultiUserChat.
/unquery¶: Close the tab.
/version¶: Get the software version of the current interlocutor (usually its XMPP client and Operating System).

Normal Conversation tab commands¶

/info¶: Display the status of this contact.
/unquery¶: Close the tab.
/version¶: Get the software version of the current interlocutor (usually its XMPP client and Operating System).

Contact list tab commands¶

/accept¶

Usage: /accept [jid]

Authorize the provided JID (or the selected contact in the contact list) to see your presence.

/add¶

Usage: /add <jid>

Add the specified JID to your contact list and authorize them to see your presence. If they accepts you, the subscription will be mutual (and if they don’t, you can still /remove them).

/deny¶

Usage: /deny [jid]

Prevent the provided JID (or the selected contact in the contact list) from seeing your presence.

/groupadd¶

Usage: ``/groupadd (<jid> <group>|<group>)

Add the given JID to the given group (if the group does not exist, it will be created). If no jid is provided, the currently selected item on the contact list (resource or JID) will be used.

/groupmove¶

Usage: /groupmove <jid> <old_group> <new_group>

Move the given JID from one group to another (the JID has to be in the first group, and the new group may not exist).

/groupremove¶

Usage: /groupremove <jid> <group>

Remove the given JID from the given group (if the group is empty after that, it will get deleted).

/name¶

Usage: /name <jid> <name>

Set the given JID’s name in your contact list.

/password¶

Usage: /password <password>

Change your password.

/reconnect¶

Disconnect from the remote server (if connected) and then connect to it again.

/remove¶

Usage: /remove [jid]

Remove the specified JID from your contact list. This will unsubscribe you from its presence, cancel its subscription to yours, and remove the item from your contact list.

Note

The following commands only exist if your server announces it supports them.

/block¶

Usage: /block [jid]

Block the following JID using simple blocking. You will not receive any of his messages and won’t be able to send some to him either.

/cert_add¶

Usage: /cert_add <name> <certificate file> [management]

Add a client X.509 certificate to the list of the certificates which grand access to your account. It must have an unique name the file must be in PEM format. [management] is true by default and specifies if the clients connecting with this particular certificate will be able to manage the list of authorized certificates.

/cert_disable¶

Usage: /cert_disable <name>

Remove a certificate from the authorized list. Clients currently connected with the certificate identified by <name> will however not be disconnected.

/cert_fetch¶

Usage: /cert_fetch <name> <path>

Download the public key of the authorized certificate identified by name from the XMPP server, and store it in <path>.

/cert_revoke¶

Usage: /cert_revoke <name>

Remove a certificate from the authorized list. Clients currently connected with the certificate identified by <name> will be disconnected.

/certs¶

List the remotely stored X.509 certificated allowed to connect to your accounts.

/list_blocks¶

List the blocked JIDs.

/unblock¶

Usage: /unblock [jid]

Unblock a previously blocked JID using simple blocking. You will be able to send and receive messages from him again.

Note

The following commands do not comply with any XEP or whatever, but they can still prove useful when you are migrating to an other JID.

/export¶

Usage: /export [/path/to/file]

Export your contacts into /path/to/file if specified, or $HOME/poezio_contacts if not.

/import¶

Usage: /import [/path/to/file]

Import your contacts from /path/to/file if specified, or $HOME/poezio_contacts if not.

XML tab commands¶

/clear [XML tab version]¶

Clear the current buffer.

/dump¶

Usage: /dump <filename>

Write the content of the XML buffer into a file.

/filter_from¶

Usage: /filter_from <jid>

Filter by JID for from attribute.

/filter_id¶

Usage: /filter_id <id>

Filter by stanza id attribute.

/filter_jid¶

Usage: /filter_jid <jid>

Filter by JID, both to and from.

/filter_reset¶

Reset the stanza filters.

/filter_to¶

Usage: /filter_to <jid>

Filter by JID for the to attribute.

/filter_xmlmask¶

Usage: /filter_xmlmask <xml mask>

Filter using an XML mask

/filter_xpath¶

Usage: /filter_xpath <xpath>

Filter with an XPath selector.